SMART Board 6000S Series Installation And Maintenance Manual page 71

Appendix A Adjusting settings
Option
Software Update
Updates Channel
Check for Updates Now
Remote Management
Launch Remote
Management Settings
Remote Management
Enabled
Radix Viso version
About
Board Name
Help
smarttech.com/kb/171414
Values Function
Stable Channel Sets which iQ system software
updates the display receives.
Beta Channel
[N/A] Checks for updates to the system
software.
[N/A] Configure the display's connection
settings with the Radix Viso server.
On Enables or disables Remote
Management on the display.
Off
[N/A] Shows the Radix Viso version.
[N/A] Select a name for your display.
[N/A] Shows the SMART support site for
iQ.
Notes User or system
setting
When switching System
from the Beta
channel to the
Stable channel, a
factory reset
occurs. See
page 69 for
more
information
about factory
reset.
For more
information
about the Beta
Channel, see
Switching to the
Beta channel.
If an update is [N/A]
available, the
text changes to
Apply update
now.
The display must
be connected to
the internet to
check for system
software
updates or a USB
drive with the
system software
update file is
connected to the
display.
This option is only System
enabled when
Remote
Management is
enabled.
[N/A] System
[N/A] System
[N/A] System
[N/A] [N/A]
71