SMART Board 6000S Series Installation And Maintenance Manual page 69

Appendix A Adjusting settings
Option
Diagnostics
Factory Reset
Save Log File to a USB
key
Submit Log file to SMART
Improve the Experience
Support ID
Logging Service
Enable Logging Service
Log Levels
Log Level RAW
Log Level SPM
Log Level RATP
Log Level SEP
Log Level EXT
smarttech.com/kb/171414
Values Function
[N/A] Resets all options to their default
values.
[N/A] Copy diagnostic logs to a USB drive.
[N/A] Send diagnostic logs to SMART.
On Sends usage statistics and error
reports to SMART.
Off
[Support ID] Shows the support ID associated
with the display.
[Languages] Sets the language for the settings
menu.
On Enables or disables saving logs to a
USB drive
Off
[N/A] [N/A]
On Advanced logging options to be set
under the direction of SMART
Off
Support
On Advanced logging options to be set
under the direction of SMART
Off
Support
On Advanced logging options to be set
under the direction of SMART
Off
Support
On Advanced logging options to be set
under the direction of SMART
Off
Support
On Advanced logging options to be set
under the direction of SMART
Off
Support
Notes User or system
setting
Only [N/A]
administrators
should reset the
display.
[N/A] [N/A]
[N/A] [N/A]
[N/A] User
Enable this [N/A]
option only on
the advice of
SMART Support,
and only in
combination with
the board's
Support ID.
[N/A] User
This option System
allows the
temporary iQ
system log files to
survive a system
restart, at the
cost of some
device storage
space.
[N/A] [N/A]
[N/A] System
[N/A] System
[N/A] System
[N/A] System
[N/A] System
69