SMART Board 6000S Series Installation And Maintenance Manual page 37

Chapter 3 Connecting computers and other devices
External audio systems
l
Room control systems
l
Connecting USB drives, peripherals, and other devices
Depending on the model, the display includes either one USB Type-C receptacle and one USB 3.0 Type-
A receptacle on the convenience panel, or two USB 3.0 Type-A receptacles on the convenience panel
(see images below). The SMART Board 6000S (V3) models also include a USB Type-C receptacle on the
connector panel. All models include one USB 3.0 Type-A receptacle on the connector panel.
You can connect USB drives, peripherals (such as keyboards), and other devices to these connectors and
use the devices with the iQ experience, connected computers, and devices installed in the accessory slot,
such as the SMART OPS PC.
SMART Board 6000S (V3)
Connecting an external display
You can connect an external display using the HDMI 2.0 out connector on the connector panel
(pictured). The external display will show the same image. This is useful when you're using the display in
an auditorium or other large space where it would be beneficial to have a second display.
Note
smarttech.com/kb/171414
SMART Board 6000S (C) SMART Board 6000S
37