Knoll Pixel KYXW7236 Installation Instructions

PIXEL™ Installation Instructions
Y-Leg Fixed-top Tables

Glides or casters

Related tables:
KYXW7236
KYXW8436
KYXW9648

Unboxing

You should have received your top plus two boxes per table.

Box 1 includes:

Leg assemblies, hardware in a red plastic bag, and installa-
tion instructions.

Box 2 includes:

Horizontal rails
Please pay close attention to torque requirements.

Step 1.

Attach the leg assemblies (A) on each end of the two
horizontal rails (B) with flat head 1/4 - 20 screws (C),
4 per rail. Use 5/32" allen wrench, torque: 50 in/lbs
4AU6008 - Oct 2015
Page 1 of 2

Parts list

1 Table top
2 Leg assemblies
2 Horizontal rails
2 Top brackets

Tools needed

Allen wrenches
Phillips screwdriver
Torque wrench
B
C
A

Hardware

8 Flat head 1/4 - 20 screws
8 Socket cap 1/4 - 20 screws
4 5/16" Shoulder screws
2 Vertical wire management clips
(clear plastic)
4 Horizontal wire management clips
with wood screws
C
C
B
C
* Casters shown
A
Fig. 1