Table of Contents
Advertisement
2. Assembly & Adjustment
2.1 Assembly Instruction
The official assembly instruction will be found with the
base components.
Make sure to ask your desk vendor for an approved
combination of desktop and frame.
2.2 Setup procedure
CAUTION—Risk of
electrical shock:
The power cord must be unplugged while the control
unit is being commissioned.
This table is equipped with ROL ECS+ system, to setup
the controlling device proceed as follows.
1. Connect the motor cables to the control unit 8-pin
motor cables (2). When there are 2 motors, connect
to socket 1 and 2.
2. Connect the handset to the relevant socket on the
control unit / ECS+
©Knoll, Inc.
3. Connect the Power Supply to the control unit / ECS+
4. Connect the power supply to the outlet.
At first use, the control unit must register the lowest
position. To do this, press the "down" icon and go to the
lowest level.
k.stand Height-Adjustable Table Standard Electric and Extended Electric—Stroke 650/470 User Manual 7
Hide quick links:
Advertisement
Table of Contents
