Knoll KCXA4818 Installation Instructions

PIXEL™ Installation Instructions
C-Leg Height Adjustable Fixed-top Tables
Glides or casters
Related tables:
KCXA4818 KCXA4824
KCXA6018 KCXA6024
KCXA7218 KCXA7224
Unboxing
You should have received your top plus two boxes per table.
Box 1 includes:
Leg assemblies, table top support castings, hardware in a
red plastic bag, and installation instructions.
Box 2 includes:
Wire management trough and flip door.
Please pay close attention to torque require-
ments.
Step 1.
Slide the flip door (A) in from the end of the
wire management trough groove.
Step 2.
Attach the wire management trough to the
C-legs. Use socket cap head 1/4"-20 x 1"
screws (B), 2 per leg, use 5/32" allen wrench,
torque: 50 in/lb. Use flat head 1/4"-20 x 1/2"
screws (C), 2 per leg, use 3/16" allen wrench,
torque: 50 in/lb.
Step 3.
Drop the trough end covers (D)
into the slots on each leg upper
casting.
4AU6011 - Oct 2015
Page 1 of 4
KCXA4830
KCXA6030
KCXA7230
Fig. 1
Parts list
1 Table top
1 Left C-leg assembly
1 Right C-leg assembly
2 Table top support castings
1 Wire management trough
1 Flip door
Tools needed
Allen wrenches
Torque wrench
Phillips screwdriver
B
D
Hardware
4 Socket cap head 1/4"-20 x 1" screws
4 Socket cap head 1/4"-20 x 2" screws
4 Flat head 1/4"-20 x 1/2" screws
10 Socket cap head 5/16"-18 x 1" screws
2 Vertical wire management clips
(clear plastic)
4 Horizontal wire management clips
with wood screws
A
C
A
* Glides shown
D
B
C
Fig. 2