Listening To The External Sources - Teac CR-L600 Owner's Manual

C
CLEAR
D
E
34
C
1. Press the PROGRAM button in the stop mode.
0-9
PROGRAM
2. Press the CLEAR button.
3. Select the desired track No. with the numeric button.
4. Press the PROGRAM button.
D
1. Press the PROGRAM button in the stop mode.
0-9
2. Select the desired track number with the MUSIC SKIP
PROGRAM
3. Press the PROGRAM button.
< The programmed contents are not lost even if the unit
< The unit will stop automatically when the playback of
< To start program playback again, press the PROGRAM
You can connect external sources such as VCR deck or
TV to the AUX input jacks.
E
Program Playback
To Modify the Program
Every time the PROGRAM button is pressed, the
programmed step are shown in the display one after
another.
Press this button until the desired step is shown in the
display.
Adding a Track
Every time the PROGRAM button is pressed, the
programmed steps are shown in the display one after
another.
button or the numeric button (0-9).
is turned off, but they are lost when the disc tray is
opened.
all the programmed tracks is finished, and the "PROG."
indicator disappears from the display, but they are not
lost.
button and the PLAY button.

Listening to the External Sources

Press the FUNCTION button to select "AUX".
ENGLISH