Pty - Teac CR-L600 Owner's Manual

1
2
3
4
42
2 4 3
PTY search
A station can be searched by this function.
1 Press the RDS mode button for more than 1.5 seconds.
Then "SEARCH" will be shown in the display.
2 Select the desired PTY mode.
(The program will blink.)
3
Press the MEMORY SET button.
4 Press the TUNING button. (PTY search will start.)
When the PTY mode that you have selected is
searched, PTY search will stop and the PTY mode will
be displayed.
If the same program type is not found during PTY
Search, it will stop at the beginning frequency.
If you want to cancel PTY search while searching,
press the RDS mode button. PTY search will stop and
search mode will be released automatically.
ENGLISH

PTY