Listening To The External Sources - Teac CR-H220 Owner's Manual

0-9
36
PROGRAM
CLEAR
You can connect external sources such as VCR deck or
TV to the AUX input jacks.
Press the TUNER/AUX 1/2 button to select "AUX
1" or "AUX 2".
Programmed Playback 2
C To clear the program
1. In the stop mode, press the PROGRAM button.
2. Hold down the CLEAR button for more than 2
seconds.
< If the OPEN/CLOSE button is pressed, the
programmed contents will also be cleared.
D
To add a track to the program
In the stop mode, press the PROGRAM button
repeatedly until the program number you want to
insert a track appears on the display. If you want to
add a track to the end of the program, press the
PROGRAM button repeatedly until "END" briefly
appears on the display.
Then select a track number using the numeric
buttons. The track is added to the program.

Listening to the External Sources

ENGLISH