OLT SpaceSaver SS124-SLIDER-CEDAR-FJ Assembly Manual page 6

12x4 sliding doors - cedar roof - fj siding
Table of Contents

Advertisement

Regular Maintenance & Tips to prolong the life of your shed.
Before/During Assembly:
1.) Paint each face and edge of your plywood floor with a latex exterior paint.
2.) Caulk wall seams if gaps appear.
3.) Caulk around window framing.
4.) Caulk perimeter between floor plywood and bottom wall plate.
5.) Caulk channels in lap siding at the top of your door above the trim, just a drop in each channel.
6.) Caulk edge of door threshold.
7.) Optional: Install a Sill Gasket between floor runners and foundation.
8.) Optional: Install an 8" strip of roofing paper below Cedar Ridge Caps for Cedar Roof Sheds.
1.
4.
Wall Panel
Floor Plywood
7.
Floor Joists
Sill Gasket
Floor Runner
Routine Maintenance:
- Routinely check all fasteners are tight (ex. Door Hinges, Nails)
- Brush off dirt from walls.
- Brush off snow from roof regularly.
- Routinely remove needles and leaves from roof.
Painting/Staining
- Your cedar shed, if left untreated, will weather to a silvery grey colour.
- Painting or staining your structure is highly recommended and will prolong the life of your shed.
- You do not need to wait to paint or stain your shed, the wood in your kit has been dried and can be
—stained or painted immediately.
- Consult your local paint store for the best paint or stain for cedar.
- Optional: stain the inside of your shed. (Note: this will remove the fresh cedar smell.)
Toll Free 1-888-658-1658
2.
5.
8.
Foundation
Strip of roofing paper over
apex of roof panels
www.outdoorlivingtoday.com
Dab of caulking
Page 6
3.
Small gap between
bevel siding and
window trim
6.
sales@outdoorlivingtoday.com

Advertisement

Table of Contents
loading

Table of Contents