Table of Contents
Advertisement
25.
Carefully flip completed Rafter Section over so Front Soffit is facing the front and place on SpaceSaver
walls. Note: Double check that your Rafter Section is positioned correctly by ensuring the ends of the
Rafters are sloped vertically as shown above.
26.
Position completed Rafter Section on top of walls. Outside Rafters will sit on Extension Wall framing
and be positioned equally from side to side.
27.
When Rafter Section is positioned correctly, both Front and Rear Soffits will sit approximately 1/8"
away from wall siding. This can vary slightly.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 19
Rafter ends vertical.
Side View
Rafter sits on framing
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
