OLT SpaceSaver SS124-SLIDER-CEDAR-FJ Assembly Manual page 33

54.
Attach 4P - Rear Middle Trims where wall
panels come together at rear seam. Attach with
8 - 1 1/2" Finishing Nails aligning tight
underneath soffit and center on seam.
Facia Nailing Strip
Front
Facia
55.
Locate one 4Q - Side Facia and one 4R - Front Facia and
align in front corner. Position facias underneath roof panel, doing
a dry run first before securing. Front Facia goes against rafter
ends and Side Facia goes against Facia Nailing Strip. Align so
the Front Facia caps the Side Facia. Attach Front Facia with
2 - 1 1/2" Finishing Nails per rafter end. Attach Side Facia to
the Facia Nailing Strip with 5 - 1 1/2" Finishing Nails.
Toll Free 1-888-658-1658
4P - Rear Middle Trim
(1/2" x 2 1/2" x 88 3/4") x 2
Side Facia
- Angle Cut
www.outdoorlivingtoday.com
Page 33
Parts
N1 - 1 1/2" Finishing Nails
Front Facia
caps Side Facia
Parts (Steps 56 - 59)
4Q - Side Facia - Angle Cut Ends
(1/2" x 5 1/2" x 54 1/8") x 2
4R - Front & Rear Facia - L/R
(1/2" x 5 1/2" x 50 1/2") x 4
4S - Front & Rear Facia - Center
(1/2" x 5 1/2" x 45 1/2") x 2
Hardware (Steps 56 - 59)
N1 - 1 1/2" Finishing Nails x 46 total
sales@outdoorlivingtoday.com
Hardware
x 16 total