Table of Contents
Advertisement
Top Siding Pc.
16.
Position 2F - Top Triangular Siding Piece onto
2G - Angle Wall Extender and align as shown above. Attach with
3 - 1 1/2" Finishing Nails to top frame of extender wall. There are
left/right top siding pieces. Use rough surface side out. Place finished
wall extender on side wall panel frame. Complete both sides now.
Note: Bottom siding of wall extender will overhang and cover siding
of side wall.
17.
Align wall framing of Angled Wall Extender and Side Wall so they are flush at the back. The siding for
both walls should also align evenly from front to back.
18.
With Angled Wall Extender and Side Wall aligned correctly, secure
together from the inside with 4 - 2 1/2" Screws.
Toll Free 1-888-658-1658
Siding
lines up.
Sidings will
overlap.
www.outdoorlivingtoday.com
Page 14
Top Siding Pc. for Angle Wall
can also be installed after Roof
is attached after Step 41.
Parts
2G - Angle Wall Extenders - L/R
(2G - 45 1/2" wide) x 2
2F - Top Triangular Siding Piece
(2F - Left/Right) x 2
Hardware
N1 - 1 1/2" Finishing Nails x 6 total
Wall framings
flush.
Hardware (Steps 18 - 19)
S1 - 2 1/2" Screws x 8 total
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
