Table of Contents
Advertisement
28.
With Rafter Section correctly aligned, secure rafters to walls using
2 - 90° Metal Brackets per side. Attach each brackets with 4 - 1 1/4" Screws.
Screw into Wall Extension Framing at the rear and Wall Panel top framing at
the front. Complete both sides.
29.
With outside rafters properly secured, attach remaining interior rafters using
1 - 2 1/2" Screw per rafter end. Screw into rafters from inside of Header on an angle
at front of shed, and from inside of Extender Wall Framing at rear of shed.
30.
Carefully flip Roof Panels over so plywood sheathing is facing up.
Center 3F - Facia Nailing Strips onto outside of each panel flush with
plywood. Attach with 4 - 1 1/4" Screws evenly spaced. The Facia Nailing
Strip provides for a greater nailing surface later when you attach side facia.
Toll Free 1-888-658-1658
Facia Nailing
Strip.
www.outdoorlivingtoday.com
Page 20
90° Metal Brackets
Hardware
Y2 - 90° Metal Bracket
x 4 total
S2 - 1 1/4" Screws
x 16 total
Hardware
S1 - 2 1/2" Screws
x 14 total
Parts
3F - Facia Nailing Strips
(3/4" x 3/4" x 51") x 2
Hardware
S2 - 1 1/4" Screws
x 8 total
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
