OLT SpaceSaver SS124-SLIDER-CEDAR-FJ Assembly Manual page 23

37.
Screw first filler shingle down to rafters using 1 - 2 1/2" Screw per panel (2 in
total). Screw on slight angle and make sure to screw into rafter. Screw slightly above
3rd row of shingles (exposure line). This way, the screw will get covered up when you
install your 2nd Filler Shingle and will prevent leaking. Do both roof seams the same.
38.
Slide 2nd Filler Shingle up and underneath fourth shingle row. Follow
Steps 36 - 37 to align and attach. Repeat for other roof seam.
39.
Slide 3rd and 4th Filler Shingles up and underneath appropriate shingle
rows and follow Steps 36 - 38 to align and attach. On last filler, screws will get
covered by Roof Ridge Board (4 1/2" wide).
Toll Free 1-888-658-1658
Attach above
the exposure
line.
Exposure
Line.
2nd Filler
Shingle.
www.outdoorlivingtoday.com
Page 23
Hardware
S1 - 2 1/2" Screws
x 4 total
Hardware
S1 - 2 1/2" Screws
x 4 total
Hardware
S1 - 2 1/2" Screws
x 8 total
sales@outdoorlivingtoday.com