Table of Contents
Advertisement
40.
Secure roof panels to walls at both ends by positioning
2 - 90° Metal Brackets on plywood and outside rafters and securing
with 4 - 1 1/4" Screws per Bracket. Complete both sides.
41.
To further secure roof panels from the inside, drill pilot holes on an angle in each
panel's Mid Rafter (3 per Rafter). Using 3 - 2 1/2" Screws, secure rafters to plywood.
Note: from outside if possible, have a helper push roof panel down so plywood sits
flush against rafter while securing.
Note: If Top Siding Pc.
for Angle Wall was not
installed in Step 16 it
can be done now. Attach
with 3 - 1 1/2" Finishing
Nails per piece.
Toll Free 1-888-658-1658
90° Metal
Brackets.
www.outdoorlivingtoday.com
3 - 2 1/2" Screws Toe
Nailed in each Mid Rafter.
Page 24
Hardware
S2 - 1 1/4" Screws x 16 total
Y2 - 90° Metal Brackets x 4 total
Hardware
S1 - 2 1/2" Screws
x 9 total
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
