OLT SpaceSaver SS124-SLIDER-CEDAR-FJ Assembly Manual page 32

52.
Place 4M & 4N - Front Corner Trims in front corner and align as
illustrated above. Do a dry run prior to attaching to achieve best fit. Start
with 5 1/2" wide Front Corner Trim and align tight underneath soffit to
determine vertical height. Attach with 8 - 1 1/2" Finishing Nails per
piece. Position and attach Side Front Corner Trim (2 1/2" wide) using
8 - 1 1/2" Finishing Nails, aligning at bottom with wide trim.
53.
To complete trimming out rear corners,
locate 4O & 4P - Rear Corner Trims. Align
and attach as per Step 52.
Toll Free 1-888-658-1658
tight underneath
soffit.
Parts
4O - Rear Corner Trims
(1/2" x 5 1/2" x 88 3/4") x 2
4P - Side Rear Corner Trims
(1/2" x 2 1/2" x 88 3/4") x 2
www.outdoorlivingtoday.com
Page 32
Parts
4M - Front Corner Trims
(1/2" x 5 1/2" x 78 1/2") x 2
4N - Side Front Corner Trims
(1/2" x 2 1/2" x 80") x 2
Hardware
N1 - 1 1/2" Finishing Nails
x 32 total
Hardware
N1 - 1 1/2" Finishing Nails
x 32 total
sales@outdoorlivingtoday.com