Table of Contents
Advertisement
Wall panel will
sit flush with
floor framing.
12.
Complete remaining side wall attachment as per Steps 10 - 11.
13.
Carefully lay 2C - Front Wall Panels face down. Position and attach
2BB - Bottom Wall Plates to bottom of wall studs of each wall panel with
3 - 2 1/2" Screws as per Step 7. Complete other remaining Front Wall.
Place Front Walls so wall framing is flush with floor frame and siding
overhangs. Attach with 3 - 2 1/2" Screws per panel as per Steps 10 - 12.
Toll Free 1-888-658-1658
Do Not Attach Walls To
Floor Until Step 23
Ensure bottom plate
is flush side-to-side
with wall studs
www.outdoorlivingtoday.com
Page 12
Parts
2C - Front Wall Panels
(35" wide x 73" high) x 2
2BB - Bottom Wall Plates
(1 5/8" x 2 1/2" x 35") x 2
Hardware
S1 - 2 1/2" Screws x 12 total
sales@outdoorlivingtoday.com
Advertisement
Table of Contents
