Chain - BMW S 1000R 2018 Rider's Manual

9
166
Press locking mechanisms 1.
Remove the diagnostic con-
nector 2 from the bracket 3.
The diagnosis and information
z
system interface can be con-
nected at the diagnostic con-
nector 2.
Secure the data link
connector
Disconnect the diagnosis and
information system interface.
Seat diagnostic connector 2
into the bracket 3.
The locks 1 engage.
Install passenger seat (

Chain

Lubricate chain
ATTENTION
Insufficient cleaning and lu-
brication of the drive chain
Increased wear
Clean and lubricate the drive
chain regularly.
After driving though water or
dust and dirt perform the lubri-
cation at shorter intervals.
Lubricate drive chain at
regular intervals.
min 497 miles (min 800 km)
Switch off ignition and engage
Neutral.
Clean drive chain with suitable
cleaning agent, dry and apply
chain lubricant.
63).
To extend and maximize
the chain's service life
BMW Motorrad recommends
using BMW Motorrad chain
lubricant or:
Lubricant
Chain spray
Wipe off excess lubricant.