Table of Contents
Advertisement
Remove diagnostic
10
connector 2 from bracket 3.
The interface to the diagnosis
230
and information system can be
connected to the diagnostic
connector 2.
Securing the diagnostic
connector
Disconnect the interface for
the diagnosis and information
system.
z
Insert diagnostic connector 2 in
bracket 3.
The locks 1 engage.
Installing seat (
Chain
Lubricating chain
ATTENTION
Inadequate cleaning and lub-
rication of the drive chain
Accelerated wear
Clean and lubricate the drive
chain at regular intervals.
Lubricate the drive chain every
800 km at the latest. Lubricate
the chain more frequently if
the motorcycle is ridden in wet,
dusty or dirty conditions.
Switch the ignition off and se-
lect neutral.
Clean the drive chain with a
suitable cleaning product, dry it
and apply chain lubricant.
NOTICE
BMW Motorrad recommends
that you use the chain cleaning
https://www.motorcycle-manual.com/
124).
products and chain lubricants
obtainable from your authorised
BMW Motorrad dealer.
Wipe off excess lubricant.
Checking chain sag
Place the motorcycle on its
stand on firm, even ground.
Turn the rear wheel until it
reaches the position with the
lowest amount of chain sag.
Use a screwdriver to push the
chain up and down and meas-
ure difference A.
Advertisement
Table of Contents
