Table of Contents
Advertisement
with anti-theft alarm system
(DWA)
OE
Connect plug connection 1 for
anti-theft alarm system.
NOTICE
Before the connector for the anti-
theft alarm system is discon-
nected, it must be ensured that
the DWA has been deactivated in
the SETUP MENU.
Remove the screw 4.
Remove anti-theft alarm sys-
tem 2; detaching at bracket 3
while doing so.
Detach plug connection 1 for
license-plate carrier.
Remove expanding rivet 2.
Remove bracket 3 for anti-theft
alarm system.
Remove screws 4 with wash-
ers 3.
Remove license-plate carrier 2
and pull out wiring harness 1.
Install passenger seat (
Installing license-plate
carrier
Park motorcycle, ensuring that
support surface is firm and
level.
Remove passenger seat
(
62).
Position the license-plate car-
rier 2 and route the wiring har-
ness 1.
7
63).
113
z
Advertisement
Table of Contents
