Table of Contents
Advertisement
Loosen lock nuts 2 on left and
9
right.
Loosen adjusting screws 3 on
148
left and right.
Remove adjusting plate 4 and
slide axle as far as possible to-
ward inside.
z
Remove quick-release axle 1
and take out adjusting plate 2.
Roll rear wheel as far forward
as possible and remove
chain 1 from chain sprocket.
Remove screw 1 and detach
brake line from bracket 2.
Make sure that the wheel
speed sensor 1 is not
damaged when rolling out the
rear wheel.
Roll rear wheel toward rear
out of swing arm while pulling
brake caliper carrier 1 toward
Advertisement
Table of Contents
