Table of Contents
Advertisement
9
138
Rear brake-pad wear
limit
min 0.04 in (min 1.0 mm)
z
(Only friction material without
carrier plate)
If the wear indicating mark is no
longer visible:
WARNING
Dropping below the minimum
pad thickness
Reduced braking action, damage
to the brake
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have brake pads replaced at
an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking front brake fluid
level
Make sure ground is level and
firm and hold motorcycle verti-
cally.
Move handlebars into straight-
ahead position.
Check brake fluid level in brake
fluid reservoir 1.
NOTICE
The brake fluid level in the brake-
fluid reservoir drops due to brake
pad wear.
Advertisement
Table of Contents
