Table of Contents
Advertisement
9
150
Roll rear wheel further into
swing arm while simultaneously
pushing brake caliper carrier 1
toward the front.
z
Roll rear wheel as far forward
as possible and lay chain 1 on
chain sprocket.
Insert shim on right 1 in swing-
ing arm so that stop 2 is point-
ing toward front.
Raise the rear wheel and in-
stall the quick-release axle 3
through the shim in the brake-
caliper support and the rear
wheel.
Ensure that quick-release axle
seats securely against travel
stop on adjustment plate.
Mount adjusting plate on left 1.
Install axle nut 2 with washer,
however do not tighten yet.
Advertisement
Table of Contents
