Table of Contents
Advertisement
Disconnect plug connection 4
9
for turn signal.
160
Remove the screw 1.
z
Pull right-hand cover panel 2
to the side and loosen from the
two brackets 3.
Remove cable strap (arrow).
Disconnect plug connection 4
for turn signal.
Remove right-hand cover
panel.
Remove screws 1 and bulb
cover 2.
Installing lamp mask
Place bulb cover 1 in position
and secure with screws 2.
Place the left-hand cover
panel 1 in position from above.
Connect the plug connection 2
for the turn signal and route
the cable.
Secure the left-hand cover
panel in the brackets 3.
Fit screw 4.
Advertisement
Table of Contents
