Table of Contents
Advertisement
rear until rear-wheel rim can be
guided past it.
NOTICE
The camshaft sprocket and the
spacing bushings on the left and
right are loosely inserted in the
wheel. During removal, make
sure that the parts are not dam-
aged or lost.
Install rear wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC/DTC
Please see the information on
the effect of wheel sizes on
the ABS and ASC/DTC chassis
control systems at the begin-
ning of this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Roll rear wheel on support into
swing arm until brake-caliper
support can be installed.
Mount brake caliper carrier 1 in
guide 2.
Make sure that wheel speed
sensor 1 is not damaged when
rolling in rear wheel.
9
149
z
Advertisement
Table of Contents
