Table of Contents
Advertisement
5
74
Adjust compression damping
z
with adjusting screw 1 on left-
hand fork leg.
To increase damping: turn ad-
justing screw with tool from
onboard tool kit so that mark-
ing 1 points to higher figure on
scale.
To decrease damping: turn
adjusting screw with tool from
onboard tool kit so that mark-
ing 1 points to lower figure on
scale.
Compression stage, ba-
sic setting, front
Position 1 (comfortable setting
with rider 187 lbs (85 kg))
Position 3 (standard setting
with rider 187 lbs (85 kg))
Position 7 (sport-oriented set-
ting with rider 187 lbs (85 kg))
Rebound-stage damping
on front wheel
without Dynamic Damping
OE
Control (DDC)
Adjust rebound-stage damp-
ing with adjusting screw 1 on
right-hand fork leg.
To increase damping: turn ad-
justing screw with tool from
onboard tool kit so that mark-
Advertisement
Table of Contents
