Installation; Mounting Vsn - Raven VSN Installation Manual

CHAPTER
3

MOUNTING VSN

NOTE: Depending upon the implement configuration, it may be necessary to create additional bracketry to
mount the VSN camera.
1. Locate a suitable mounting position for the VSN camera on the implement.
a. Mount VSN at the front of the implement.
b. Mount VSN toward the end of the implement as possible.
c. VSN may be mounted either in between rows or on top of a row.
2. Mount the VSN Implement Side Bracket (P/N 116-0159-865) to the implement frame as shown in Figure 1 on
page 10. The example in this figure represents M16 U-bolts around a 100 mm x 100 mm square frame tube.
NOTE: Ensure the bracket mounting location will not cover or impair use of any warning or instruction labels
or reflective decals.
Installation: Mounting VSN
I NSTALLATION
C H A P T E R 3
WARNING
Unfold and lower the implement during the
installation process.
9