Download Print this page

OLT 12x4 GardenSaver Shed Assembly Manual page 41

Slider ak bevel model with metal roof
Hide thumbs Also See for 12x4 GardenSaver Shed:

Advertisement

caulk in siding
channel on both
sides of window.
69.
Locate 4W - Window Inserts. Before installing, dab caulk in siding channel
on both sides of window opening. This will prevent water from getting in behind
window. Position window in cavity and secure with 8 - 1 1/4" Screws. Caulk gap
between siding and window at top. This requires a large amount of caulking but is
important to fill. Later, Window Trims will be installed to hide caulking. Complete
second Window Insert the same.
70.
Position 4X - Window Trim around window doing a dry run
first and attach with 4 - 1 1/2" Finishing Nails per piece. Window
trim has a small dado on reverse face. Outside flange of window
will roughly sit in the dado to give a better fit. Complete both
windows the same.
71.
Attach Y3 - Door Handles
and Y11 - Black Hasp. Handles
and Hasp are positioned on
wide door trim and mounted with
3/4" Black Screws.
Hardware
Y3 - Door Handles x 2 total
Y11 - Black Hasp x 1 total
SB1 - 3/4" Screws x 16 total
1-888-658-1658
Dab
Trim dado
sits in flange.
www.outdoorlivingtoday.com
(Top pc - 24 1/16") x 1- Angle Ends
N1 - 1 1/2" Finishing Nails x 32 total
Pre-drill 1/4"
deep with 1/8" drill
bit for all door
hardware.
Page 41
caulk in siding
Requires a large
Parts
4W - Window Inserts
(18 1/4" x 23") x 2
Hardware
S2 - 1 1/4" Screws
x 16 total
Parts
4X - Window Trim Kit x 2
(Side/Bottom pcs - 23") x 3
Hardware
sales@outdoorlivingtoday.com
Run
gap at top.
amount.

Advertisement

loading