OLT 12x4 GardenSaver Shed Assembly Manual page 24

39.
Overhang the Metal Roof Panels past the Battens on the sides by approximately 3/4". The overhang
on front and back will be set by the Metal Roof Hangers, but should be approximately 1" on the front and
approximately 4" on the back.
40.
Adjust the position of remaining Metal Roof Panels on Battens as per Step 39. Overlap Metal Roof
Panels to achieve the desired overall width. Overall width past the end of Battens can vary from 1" - 3",
depending on your personal preference.
1-888-658-1658
3/4" Overhang
www.outdoorlivingtoday.com
Page 24
Metal roof Panels
should overlap
each other.
sales@outdoorlivingtoday.com