OLT 12x4 GardenSaver Shed Assembly Manual page 18

Note: We recommend you drill a 1/8" pilot hole for each screw, to avoid
splitting wood. The hole depth should be equal to 3/4 the length of screw.
A.
21 3/4"
25.
Locate 3A - Rafters, 3B & 3C - Soffits. Lay
out on level ground and assemble as shown above
in Illustrations A through C below. Attach Soffit
Boards flush to end of outside rafters. Attach Front
Soffits with 2 - 1 1/4" Screws per rafter end. Attach
Rear Soffits with 2 - 1 1/4" Screws per rafter end.
Important: Drill pilot holes in Soffit ends to prevent
splitting. Attach double rafters as illustrated above
with 3 - 2 1/2" Screws per rafter/rafter connection.
Toll Free 1-888-658-1658
C.
48"
21 3/4"
Rear Soffits
Rear
www.outdoorlivingtoday.com
B.
Screw Rear Soffits to
Rafters with 2 - 1 1/4"
Screws per rafter end.
141 1/2"
45 1/2"
20 1/2" 20 1/2"
Parts
3A - Rafters
(1 1/2" x 2 1/2" x 54") x 9
3B - Front & Rear Soffits - L/R
(1/2" x 3 1/2" x 48") x 4
3C - Front & Rear Soffit - Center
(1/2" x 3 1/2" x 45 1/2") x 2
Page 18
Screw Front Soffits to
Rafters with 2 - 1 1/4"
Screws per rafter end.
Screw double
rafters together with
3 - 2 1/2" Screws.
Front Soffits
48"
21 3/4" 21 3/4"
Hardware
S1 - 2 1/2" Screws
x 24 total
S2 - 1 1/4" Screws
x 18 total
sales@outdoorlivingtoday.com
Front