OLT 12x4 GardenSaver Shed Assembly Manual page 20

29.
With Rafter Section correctly aligned, secure rafters to walls using
2 - 90° Metal Brackets per side. Attach each brackets with 4 - 1 1/4" Screws.
Screw into Wall Extender framing at the front and Wall Panel top framing at
the rear. Complete both sides.
30.
With outside rafters properly secured, attach remaining interior rafters using
1 - 2 1/2" Screw per rafter end at the front of the shed. Screw into rafters from inside
of Header on an angle.
31.
With outside rafters properly secured, attach remaining interior rafters using
1 - 2 1/2" Screw per rafter end at the rear of the shed. Screw into rafters from inside
of Extender Wall Framing.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com
Page 20
90° Metal Brackets
Hardware
Y2 - 90° Metal Bracket
x 4 total
S2 - 1 1/4" Screws
x 16 total
Hardware
S1 - 2 1/2" Screws
x 7 total
Hardware
S1 - 2 1/2" Screws
x 7 total
sales@outdoorlivingtoday.com