OLT 12x4 GardenSaver Shed Assembly Manual page 21

1/8" back from Rafter end.
Overhanging 2" on outside
Rafter.
32.
Locate first first row of Roof Battens. Position
on rear of roof Rafters. Place 1/8" back from end of
Rafter. Batten will sit evenly on center rafters over-
hanging 2" on the outside rafters. Attach Battens
with 1 - 1 1/4" Screw per each rafter. Pre-drill with
1/8" drill bit first to prevent end from splitting.
Batten Spacers
33.
Locate Batten Spacers. Place one Batten Spacer above each Batten lengthwise along outside
Rafter. Attach each Batten Spacer to outside Rafter with 2 - 1 1/4" screws per Batten Spacer (4 total).
1-888-658-1658
Parts (Steps 32 - 34)
3G - Roof Battens - Outer
(3/4" x 3 1/2" x 50") x 6
3H - Roof Battens - Center
(3/4" x 3 1/2" x 45 1/2") x 3
www.outdoorlivingtoday.com
Page 21
Parts (Steps 32 - 36)
3D - Batten Spacers
(3/4" x 1 1/2" x 21 5/8") x 4
Hardware (Steps 32 - 36)
S2 - 1 1/4" Screws
x 34 total
sales@outdoorlivingtoday.com