OLT 12x4 GardenSaver Shed Assembly Manual page 17

24.
To complete Wall Section, attach bottom 2x3 wall plates to plywood floor with
2 - 2 1/2" Screws per wall section. Prior to securing, make sure wall panels are
aligned correctly on the floor. Refer to Step 9. Wall siding should overhang floor
while 2x3 wall plates should sit flush with floor.
3. Rafter and Roof Section
Exploded view of all parts necessary to complete the Rafter and Roof Section. Identify all parts
prior to starting.
Batten Spacers
4pcs (Part 3D)
Roof Battens
(Parts 3G, 3H)
Soffits - L/R -
4pcs (Part 3B)
1-888-658-1658
Optional - Caulking seams will help
prevent moisture from entering at
seam. Caulking not included in kit.
Metal Drip Caps
- 3pcs (Part 4V)
Soffit - Center -
2pcs (Part 3C)
www.outdoorlivingtoday.com
Page 17
S1 - 2 1/2" Screws
Foam Enclosures
(Several Strips)
sales@outdoorlivingtoday.com
Hardware
x 28 total
Metal Roof
Panels - 4pcs
(Part 3K)
Facia Nailing
Strips - 2pcs
(Part 3F)
Rafters - 9pcs
(Part 3A)