67.
Attach 4U - Trim Detail Plates to cover seams. Two Plates will
cover seams where Rear Facia pieces meet, attach these with 4 - 1 1/2"
Finishing Nails per piece. One more Trim Plate will cover the seam of
the Track Overlay, attach with 3 - 1 1/2" Finishing Nails along the top of
the Plate so nails are secured to 2x4 backing.
Front Metal
Drip Cap.
68.
Place Foam Enclosures at top of Metal Roof. Place Front Metal Drip
Caps (3 pieces - 60" long) on top of metal roof at front. Evenly space from
side-to-side allowing caps to overlap each other. Overhang the cap approxi-
mately 1" past each end. When Drip Cap is correctly positioned, secure with
5 - 2" long self tapping Metal Roof Screws as per Step 44. Screw into to top
batten. Do not overtighten.
1-888-658-1658
Foam Enclosures
www.outdoorlivingtoday.com
1/4" Nut Driver and
2" long Metal Roof
Screw.
Page 40
Parts
4U - Trim Detail Plates
(5 1/2" high) x 3
Hardware
N1 - 1 1/2" Finishing Nails
x 11 total
Parts
4V - Front Metal Drip Caps
(6" x 60" -angled) x 3
Foam Enclosures (Several)
Hardware
2" Metal Roof Screws x 5
total
sales@outdoorlivingtoday.com