Signalstatus - Canon MARKLL WUX10 Command List

SIGNALSTATUS

Signal status inquiry
Format
GET□SIGNALSTATUS
Environment
Power
OFF ON
X O
Response
Current image signal input status is returned as
'g:SIGNALSTATUS=<Signal status:ID>'
<Signal status:ID>
Signal status
NO_SIGNAL
DISPLAYING
SETTING
For details on other responses, refer to the "Error List".
Description
(1) This inquires about the current image signal input status.
(2) This returns the signal status of the selected input. Use INPUT command for the input
selection.
(3) "e:1006:NOW_BLANK" is returned during blanking.
Example
> GET SIGNALSTATUS or ? SIGNALSTATUS
< g:SIGNALSTATUS=NO_SIGNAL
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/ ?△SIGNALSTATUS
PM D-RGB A-RGB1 A-RGB2 COMP
X
Meaning
Signal not detected
Image now displayed or display enable status
Signal detection and display preparation in progress
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO HDMI
-
- 72 -
None
Revised by
Approved by