Signalstatus - Canon WX6000 User Commands

SIGNALSTATUS

Signal status inquiry
Format
GET□SIGNALSTATUS
Environment
Power
OFF ON PM D-RGB
X O X
Response
Current image signal input status is returned as
'g:SIGNALSTATUS=<Signal status:ID>'
For details on other responses, refer to the "Error List".
<Signal status:ID>
Signal status
Signal not detected
NO_SIGNAL
DISPLAYING Image now displayed or display enable status
Signal detection and display preparation in progress
SETTING
Description
(1) This inquires about the current image signal input status.
(2) This returns the signal status of the selected input. Use INPUT command for the input
selection.
(3) "
e:1006:NOW_BLANK
Example
> GET SIGNALSTATUS or ? SIGNALSTATUS
< g:SIGNALSTATUS=NO_SIGNAL
* Commands are indicated by ">", and responses are indicated by "<".
/ ?△SIGNALSTATUS
Input
A-RGB COMP HDMI None
-
Meaning
" is returned when it is set to BLANK.
- 72 -
WX6000 / SX6000 User Commands