Autopc - Canon MARKLL WUX10 Command List

AUTOPC

Auto PC
Format
AUTOPC
Environment
Power
OFF ON
X O
Response
"i:OK" is returned if the control was executed properly.
For details on other responses, refer to the "Error List".
Description
(1) This executes Auto PC.
(2) This command is identical to pressing the "AUTOPC" button on the remote control.
(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned
as an error response.
(4) If signals are not input, "e:2010 NO_SIGNAL" is returned.
(5) Execution of this command may modify the following setting values.
・Total number of dots
・Tracking
・Horizontal/vertical positions
・Number of horizontal/vertical display dots
(6) To confirm modified setting values, use the GET command of the respective parameter.
For details, refer to the GET commands below.
Total number of dots
Tracking
Horizontal position
Vertical position
Number of horizontal display dots GET HPIX
Number of vertical display dots
Example
> AUTOPC
< i:OK
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
PM D-RGB A-RGB1 A-RGB2 COMP
X X O O
Setting
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO HDMI
X X X
GET
GET DOTS
GET TRACK
GET HPOS
GET VPOS
GET VPIX
- 18 -
None
X
Revised by
Approved by