Sat - Canon MARKLL WUX10 Command List

SAT

Color saturation setting
Format
RGBGAIN=<R gain setting:Number>▽<G gain setting:Number>▽<B gain setting:Number>
GET□RGBGAIN
Setting values for <Color saturation setting value:Number> are -20 to 20.
Environment
Power
OFF ON
X O
Response
"i:OK" is returned if the parameter was set properly.
For
'GET SAT
'
g:SAT=<Color saturation setting value:Number>
For details on other responses, refer to the "Error List".
Description
(1) This sets the screen color saturation.
(2) This command functions in the same way as when "Image adjustment" - "Color adjustment" -
"Color saturation setting" are selected on the menu.
(3) If the input is "HDMI", 'e:200X INVALID_SOURCE(***)' is returned as an error response.
(4) When image mode is not set to "PHOTO", 'e:2020 INVALID_IMAGE_MODE' is returned as an
error response even if the input is "D-RGB", "A-RGB1" or "A-RGB2".
(5) If numerical parameters are outside the range, "e:0801 INVALID_VALUE" is returned.
(6) This sets the currently selected input signal and image mode.
(7) The GET command can be used to retrieve the current color saturation. ("
Example
Setting
> SAT=-10
< i:OK
Reference
> GET SAT or ?SAT
< g:SAT=1
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/ ?△RGBGAIN
PM D-RGB A-RGB1 A-RGB2 COMP
X O O O
' or ' ', current saturation setting value is returned as
?SAT
This sets the color saturation to –10.
This retrieves the color saturation.
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO HDMI
O O X
'
- 67 -
None
O
")
GET SAT
Revised by
Approved by