Freeze - Canon MARKLL WUX10 Command List

FREEZE

Freeze status
Format
FREEZE=<FREEZE parameter:ID>
GET□FREEZE
<FREEZE parameter:ID>
ON
OFF
Environment
Power
OFF ON
X O
Response
"i:OK" is returned if the parameter was set properly.
For '
GET FREEZE
'gFREEZE=ON'
'g:FREEZE=OFF'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to freeze the image.
(2) This command is identical to pressing the "FREEZE" button on the remote control.
(3) The current freeze status can be obtained using the GET command. ("
Example
Setting
> FREEZE=ON
< i:OK
Reference
> GET FREEZE or ?FREEZE
< g:FREEZE=ON
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/ ?△FREEZE
Image now frozen
Image now not frozen
PM D-RGB A-RGB1 A-RGB2 COMP
X
' or ' ', current freeze status is returned as
?FREEZE
Freezes image.
The current freeze status is referenced.
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO HDMI
-
- 32 -
None
")
GET FREEZE
Revised by
Approved by