LAMP
Lamp output setting
Format
LAMP=<Lamp output setting parameters:ID>
GET□LAMP
<Lamp output setting parameters:ID>
NORMAL
SILENT
Environment
Power
OFF
ON
X
O
Response
"i:OK" is returned if the parameter was set properly.
For '
GET LAMP
'g:LAMP=<Lamp output setting parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1)
This command is used to set the light quantity of the lamp to "NORMAL" or "SILENT"
(reduced light quantity appropriate for silent cooling).
(2)
This command functions in the same way as when "Image adjustment" - "Lamp mode setting"
are selected on the menu.
(3)
This sets the currently selected input signal and image mode.
(4)
The current lamp output can be acquired using the applicable GET command. ("
Example
Setting
> LAMP=NORMAL
< i:OK
Reference
> GET LAMP or ?LAMP
< g:LAMP=SILENT
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/
?△LAMP
Normal
Silent cooling
PM
D-RGB A-RGB1 A-RGB2 COMP
X
' or '
', current lamp output is returned as
?LAMP
The lamp output is set to "NORMAL".
This retrieves the lamp output.
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO
HDMI
-
- 45 -
None
GET LAMP
Revised by
Approved by
")