Canon MARKLL WUX10 Command List page 81

WB
Screen color correction
Format
WB=<Screen color correction parameters:ID>
GET□WB
<Screen color correction parameters:ID>
NORMAL
GREENBOARD
ADJUST
Environment
Power
OFF ON
X O
Response
"i:OK" is returned if the parameter was set properly.
For ' ' or '
GET WB
'g:WB=<Screen color correction parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) The screen color correction is set to "Normal", "Blackboard", or "Adjust".
(2) This command functions in the same way as when "Display setting" - "Screen color correction"
are selected on the menu.
(3) When "ADJUST" has been selected, adjust the RGB adjustment values using the WBRGB
command.
(4) The current screen color correction can be acquired using the applicable GET command. ("
")
WB
Example
Setting
> WB=NORMAL
< i:OK
Reference
> GET WB or ?WB
< g:WB=GREENBOARD
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/ ?△WB
Standard
Blackboard
Adjust
PM D-RGB A-RGB1 A-RGB2 COMP
X
', current screen color correction is returned as
?WB
This sets the screen color correction to "Normal".
This retrieves the screen color correction.
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO HDMI
-
- 77 -
None
Revised by
Approved by
GET