Pmm - Canon MARKLL WUX10 Command List

PMM

Power management
Format
PMM=<Power management setting parameters:ID>
GET□PMM
<Power management setting parameters:ID>
OFF
STANDBY
EXIT
Environment
Power
OFF ON
X O
Response
"i:OK" is returned if the parameter was set properly.
For '
GET PMM
'g:PMM=<Power management setting parameters:ID>'
For details on other responses, refer to the "Error List".
Description
(1) This sets the power management mode.
(2) This command functions in the same way as when "System setting" - "Power management
mode" are selected on the menu.
(3) Power management cannot be set to OFF if ON has been selected as the direct power-on
setting (DPON=ON).
("
e:1005 DIRECT_POWER_ON
(4) The current power management mode can be acquired using the applicable GET command.
("
GET PMM
Example
Setting
> PMM=STANDBY
< i:OK
Reference
> GET PMM or ?PMM
< g:PMM=EXIT
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/ ?△PMM
OFF
Standby mode
Exit mode
PM D-RGB A-RGB1 A-RGB2 COMP
X
' or ' ', current power management setting is returned as
?PMM
" is returned)
")
This sets the power management to "standby".
This retrieves the power management mode.
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO HDMI
-
- 55 -
None
Revised by
Approved by