Hpix/Vpix - Canon MARKLL WUX10 Command List

HPIX/VPIX

Horizontal/Vertical resolution adjustmen
Format
HPIX=<Horizontal resolution:Number>
VPIX=<Vertical resolution:Number>
GET□HPIX
GET□VPIX
Environment
Power
OFF ON
X O
Response
"i:OK" is returned if the parameter was set properly.
For '
GET HPIX
'
g:HPIX=<Horizontal resolution:Number>
（'
g:VPIX=<Vertical resolution:Number>
For details on other responses, refer to the "Error List".
Description
(1) This adjusts the horizontal and vertical resolution (number of dots) on the screen.
(2) This command functions in the same way as when "Display setting" - "Input signal settings" -
"Horizontal resolution adjustment" or "Vertical resolution adjustment" are selected on the
menu.
(3) If the input is neither "A-RGB1" nor "A-RGB2", 'e:200X INVALID_SOURCE(***)' is returned
as an error response.
(4) If signals are not input, 'e:2010 NO_SIGNAL' is returned.
(5) Adjustment range is limited. If number is invalid, "e:0801 INVALID_VALUE" is returned.
(6) The GET command can be used to retrieve the current horizontal and vertical position. ("
" "
HPIX
Example
Setting
> HPIX=1024
< i:OK
Reference
> GET VPIX or ?VPIX
< g:VPIX= 864
* Commands are indicated by ">", and responses are indicated by "<".
Revision History / Date
/ ?△HPIX
/ ?△VPIX
PM D-RGB A-RGB1 A-RGB2 COMP
X O O O
' or ' ' (' ' or '
?HPIX GET VPIX
")
GET VPIX
This sets the horizontal resolution to 1024.
This retrieves the vertical resolution.
Changes
Projector WUX10 MarkII User Commands
Input
VIDEO HDMI
X X X
'), current horizontal (vertical) resolution is returned as
?VPIX
'
'）
- 37 -
None
X
Revised by
Approved by
GET