Signalstatus - Canon WUX6000 User Commands

SIGNALSTATUS

Signal detection inquiry
Format
Setting Command
Response
Reference Command
Response
< Signal status parameter:ID >
Parameter
NO_SIGNAL
DISPLAYING
SETTING
Environment
Power mode restriction
LAN
SL0 SL1 SL3 PM ON
No No No No Yes
Remarks
(1) This returns the signal status of the selected input.
(2) "e:1011 FUNCTION_NOT_AVAILABLE" is returned during BLANK.
Example
> GET=SIGNALSTATUS
< g:SIGNALSTATUS=NO_SIGNAL
Note: '>' indicates a command; '<' indicates a response.
-
-
GET=SIGNALSTATUS
g:SIGNALSTATUS=<Signal status:ID>
Note: See "Error list" for any response other than the above.
Meaning
Signal not detected
Image now displayed or display enable status
Signal detection or display preparation in progress
RS-232C
ST PM ON D-RGB
No No Yes Yes
-85-
WUX6000 User Commands
Input
A-RGB COMP HDMI
Yes Yes Yes
LAN USB None
Yes Yes Yes