Display Options And Diagnostics- 9" Display Series Console - Landice L-10 Service Manual

Display Options and Diagnostics- 9" Display Series Console:

TO ENTER ENGINEERING/DIAGNOSTIC MODE:
Press and hold 3, 9 Start until the following screen comes up:
Use the +/- keys to scroll through menu, START button to enter into mode. The STOP button will go back to the menu.
Error Logs – Will show any errors the unit has registered while in operation.
NV Init Boot – Shows the software version of the treadmill.
Diagnostics – This screen will show the speed sensor readout, elevation pot readout, as well as other operation
information.
Reprogram Firmware – Only to be used when updating the system software, please see the Instructions to Install
Software Update – 9" Display Series for more information.
Self Diagnostics – The treadmill will auto diagnose and report any issues the software has found. Treadbelt and
elevation motor may move during this process.
Toggle Lockout Mode: Enables or disables Lockout Mode, which will request a 4 digit pin to use the unit.
Toggle Units: Switches between Metric and English
Toggle Beeper: Enables or disables beeping function during operation and key press.
Toggle User Presence: Should be disabled by default. DO NOT ENABLE!
Toggle Client Mode: Enabled by default for residential models, disabled on commercial units. Allows 2 user
profiles that keep track of statistics while using the treadmill.
24