Inverter Board - Landice L-10 Service Manual

Inverter Board (Lower Board) Removal & Installation:
Inverter Board (Lower Board) Installation/Removal Instructions
INTRODUCTION: This document is to be used for installation/removal of the Inverter board(#10011).
TOOLS REQUIRED:
BEFORE YOU BEGIN:
With the unit powered off, remove each connected harness from the inverter board (Lower Board). Be
careful not to yank on the connector tab, as it can break if forcefully removed.
Using a Phillips head screwdriver, remove the 2 screws mounting the lower board to the dust-shield.
Remove the two screws mounting the lower board to the motor pan.
 Phillips Head Screwdriver
Cordless Screw Gun w/ Phillips Head Tip

Power off the unit and unplug from power source before removal.
Step 1
Step 2
48