Upper Console Replacement Instructions
TOOLS NEEDED:
● #2 Phillips Head Screwdriver
POWER OFF THE UNIT BEFORE STARTING.
Begin by using your Phillips head screwdriver to remove 12 screws from the back of the display.
Remove the back panel to reveal upper circuit board.
Locate the ribbon connection that leads to the button panel. Using your finger, nudge the black tab
into the upward position, as shown above. You will then be able to remove the ribbon from the
membrane. Next, remove the entire upper display assembly from the treadmill. To replace, follow the
instructions in reverse.
1 800 - LANDICE | SERVICE@LANDICE.COM | WWW.LANDICE.COM