Drive Motor - Landice L-10 Service Manual

Drive Motor Installation/Removal Instructions
INTRODUCTION: This document is for installation and removal of the AC Drive Motor (#10037).

Tools Required:


BEFORE YOU BEGIN:
treadmill before removing or installing parts.
Carefully disconnect the drive motor harness from the lower board (inverter), then remove the drive
motor harness from where it is routed in the motor pan.
Carefully work the drive belt off the drive motor shaft. Then, using the 13mm socket wrench, remove
all 4 mounting bolts holding the drive motor in place.
We recommend using a 4" socket wrench extension for easier access.

Drive Motor

13mm Socket
Socket Wrench
4" Socket Wrench Extender
This is a high voltage AC unit. Please turn off and remove power from the
Step 1
Step 2
43