Menu Settings Summary Tables
Main Menu
Head Cleaning
Force Cutting
Auto Feed
Take-up Reel
Cut Sheet Type
Roll Media Type
Rep. Ink Tank
Auto Cut
System Setup
Cutter
Buzzer
5-10
Using the Operation Panel
The menus provide the functions listed and described in the tables below.
Settings marked with an asterisk (*) in the tables are the initial or default
values.
Menu Item
Available Settings
Head Cleaning A
Head Cleaning B
*1
Yes*, No
*2,3
Yes*, No.
*3
Disable*, Enable
Plain Paper*, Coated Paper,
Heavy Coated, Glossy Paper,
Photo Glossy, Semi-Glossy,
*4
Glossy Film, Back Print Film,
Proof, Special 1
Plain Paper*, Coated Paper,
Heavy Coated, Glossy Paper,
Photo Glossy, Semi-Glossy,
Glossy Film, Back Print Film,
Proof, Special 1
No*, Yes
*5
Yes*, Print Cut Line, No
Enable*, Disable
On*, Off
Cleans the printhead.
Re-fills the printhead with ink.
Cuts the roll media at the current position
under the cutter. However, when the media
is within 10 cm (4 in.) of the leading edge,
the media is cut after it loads as far as the 10
cm (4 in.) position.
Selects automatic feed for the Media
Take-up Unit.
Sets the operation for the Media Take-up
Unit. When "Enable" is selected, the cutter
is automatically switched off.
Selects the type setting for cut sheet
media.
~
5
Selects the type setting for roll media.
~
5
Sets the printer in the replace ink tank
mode.
Selects automatic cutting when
printing with roll media. If you select
"Print Cut Line", a line prints to guide
manual cutting.
Switches the roll media cutter on and
off.
Switches the buzzer function off and
on. When the buzzer is on, it buzzes
when an error occurs.
Function